Scag SFC-30

Specs

Model	Deck Width	Engine	Horsepower	MSRP
SFC-30-7CV	30″	Kohler® Command PRO® CV224	7	$2,719
SFC-30-7CV-CA	30″	Kohler® Command PRO® CV224 (California)	7	$2,719
SFC-30-7CV-S	30″	Kohler® Command PRO® CV224 – swivel front caster	7	$2,999
SFC-30-7CV-S-CA	30″	Kohler® Command PRO® CV224 – swivel front caster (California)	7	$2,999

Product Dimensions	SFC-30	SFC-30 Swivel
Length – Transport (handles in upright transport position)	41″	44″
Length – Minimum (handles in highest operating position)	66″	69″
Length – Max (handles in lowest operating position)	73.5″	76.5″
Tracking Width	28.75″	28.75″
Width (w/ discharge chute)	36.75″	36.75″
Width (w/ discharge block off plate)	31.5″	31.5″
Height – Lowest Operating	36.75″	36.75″
Height – Max Operating	45.25″	45.25″
Height – w/ Handle Bar in Storage Position	57.5″	57.5″
Operating Weight – Bagging	220 lbs.	233 lbs.
Operating Weight – Mulching	214 lbs.	227 lbs.
Operating Weight – Discharging	213 lbs.	226 lbs.

General
Total Fuel Capacity	1 gallon (0.37 gallon capacity for California models)
Rear Tires	10.5″ x 3″ rubber tire w/ glass-filled polypropylene wheel
Front Tires	9” x 2.25” rubber tire w/ glass-filled polypropylene wheel
Drive System
Drive System Type	GT MV 702 Transmission
Forward Ground Speed	Up to 4 mph
Parking Brake	Hand lever
Deck
Cutting Widths	30″
Type	Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup.
Cutting Height	1.5″ to 5″ in .25″ increments.
Blade Type	Optimized for maximum performance whether discharging, mulching or bagging
Deck Lift	Hand lever. Single-point adjustment.
Construction	14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts.
Spindles	Aluminum housing with sealed ball bearings.
Blade Engagement	Blade brake clutch allows operator to disengage cutter blades without shutting off the machine.
Discharge, Mulch, Bag	Standard
Bag Capacity	2.5 Bushels